VM10-J
Dimensions
Easy to use in narrow area with 0.99 m machine width
Design
Large tool tray
Advantage
Zero meter tail swing
Öne Çıkan Özellikler
STANDART EQUIPMENTS
| 24V AC Electric Drive motors |
|---|
| Emergency stop buttons |
| 24V 250A Tractioner batteries |
| Load sensing |
| 24V 30 A Battery charger |
| Motion alarm |
| Drive at full height |
| Cylinder holding valve |
| Diagnostic display with information |
| Emergency lowering system |
| Crane point for easy lifting and carrying |
| Proportional Joystick |
| Passive pothole protection |
| Audible overload and tilt alarm |
| Tool tray |
| Automatic battery water filling |
| Non-marking tyres |
| CAN communication system |
| Electric break release |
| Horn |
| Hourmeter |
| CE-EN280 Certificate |
DIMENSIONS
| Working Height | 9.80 m |
|---|---|
| Platform Height | 7.80 m |
| Horizontal Reach | 3.15 m |
| Stowed Height (Platform) | 0 |
| 42 m | |
| Machine Stowed Height | 1 |
| 99 m | |
| Chassis Ground Height (Pothole Close) | 0.10 m |
| Chassis Width | 0.99 m |
| Chassis Length | 1.70 m |
| Wheelbase | 1.20 m |
| Length | 2.70 m |
| Platform Width | 0.99 m |
| Platform Length | 1.11 m |
TECHNICAL SPECIFICATIONS
| Maximum Lifting Capacity | 200 kg |
|---|---|
| Maximum Occipants (Indoor / Outdoor) | 2 / 1 personnel |
| Gradeability | 25% |
| Oscillation | 0 m |
| Vertical Jib Angle | 135° (+70° / -65°) |
| Turret Rotation | 350° |
| Turning Radius (Inside / Outside) | 0 |
| 5 m / 2 | |
| 10 m | |
| Platform Lifting / Descent Time (Loaded Condition) | 40 s / 45 s |
| Driving Speed (Closed Position - Open Position) | 5 km/h - 0 |
| 65 km/h | |
| Tyres Dimensions (DIA * W) | Solid 406 * 127 mm |
| Hydraulic Tank | 12 L |
| Batteries | 4 * 6 V / 250 A/h |
| Battery Charger Input | 100 V - 240 AC |
| Battery Charger Output | 30 A |
| Working Slope (x - y) | 2° - 3° |
| Communication System | CAN Drive Mode |
| Brake | Rear Wheels |
| Drive Controls | Proportional Control |
| Weight | 2800 kg |
VM10-JGALLERY
